Dyna Roller Protector EPDM is especially designed for EPDM based ink rollers and is used on multi colour offset presses when some of the units of these presses are not used while the other unit(s) is/are printing a job.
Dyna Roller Protector EPDM allows ink rollers, which are not covered with ink, to rotate (idle) without any troubles. It protects these rollers as Dyna EDPM Roller Protector acts like a lubricant. It overcomes excessive heat and so there is no mechanical friction resulting in a situation where ink rollers last much longer.
Dyna EDPM Roller Protector is based on these raw materials, which can be qualified as compatible with all UV offset inks. Despite the product has been designed for EPDM surfaces the product has NBR compatibility as well.
Apply sufficient (approx. 10 to 20 ml.) Dyna Roller Protector EPDM to provide good coverage without causing the rollers to slip or to dry out. After the job has been completed and the unit concerned is needed for a regular printing job, it is recommended to scrape off the used Dyna Roller Protector EPDM. If there still is a remarkable amount of used Dyna Roller Protector EPDM on the rollers it is recommended to wash up these rollers with a dedicated UV ink roller wash.
Packaging / Product code:
500 ml bottles / CHREVPT500EPDM
Dyna Roller Protector EPDM is compatible with Westland and Endura compounds.